NOT MEASUREMENT
SENSITIVE
MIL-DTL-62462D(AT)
30 September 1998
SUPERSEDING
MIL-PRF-62462C(AT)
14 June 1996
DETAIL SPECIFICATION
ENGINE, DIESEL, LIQUID-COOLED, 8 CYLINDER;
4 CYCLE, V-TYPE, 220 KW (295 HP)
This specification is approved for use by the U.S. Army Tank-automotive
and Armaments Command, Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for a liquid cooled, 4 cycle,
90 degree (°) V-type, 8 cylinder internal combustion, compression ignition engine. At
2600 revolutions per minute (rpm), the diesel engine is rated at 220 kilowatts (kW)
(295 horsepower (hp)). The diesel engine, and the associated accessories furnished by the engine
supplier are referred to herein as "engine".
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: U.S. Army Tank-automotive
and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document, or by letter.
AMSC N/A
FSC 2815
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business