MIL-PRF-62140B
3.6 Exterior surface treatment. All exposed exterior surfaces of the engine and its
accessories and components shall be cleaned and painted or treated for corrosion resistance in
accordance with the manufacturer's standard practice (see 4.6.2).
3.7 Plates. Unless otherwise shown on the applicable drawings, the nameplate, data, and
instruction plates shall conform to A-A-50271 (see 4.6.2).
3.8 Workmanship. Workmanship shall be of the quality necessary to produce engines free
from defects that would affect their serviceability (see 4.6.2).
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.3).
b. Conformance inspection (CI) (see 4.4).
1. Examination (see 4.4.1)
2. Tests (see 4.4.2)
c. Control Tests (see 4.5)
4.2 Inspection conditions. Unless otherwise specified herein, all inspections shall be
performed under the following standard (room) ambient conditions:
77 + 18°F.
a. Temperature:
b. Relative humidity:
Uncontrolled room ambient.
c. Atmospheric pressure:
Site pressure.
4.3 First article inspection. First article inspection shall be performed on one or more
engines when a first article sample is specified (see 6.2). Unless otherwise specified (see 6.2), first
article inspection shall include the inspections specified in table III.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business