MIL-DTL-46796 Engine, Diesel: 8 Cylinder, V-Type 390 To 440 H.P.This specification covers several 8 cylinder, V-type, liquid-cooled, 2-stroke-cycle, turbo-supercharged, internal-combustion, compression ignition engines for use in military vehicles \(see 6.1\). The basic design of these engines is very similar and the characteristic differences have been classed as Type I or Type II for the lower or the higher power versions.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22

MIL-DTL-46796D

FEDERAL SPECIFICATIONS

A-A-52624

Antifreeze, Multi-Engine Type.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-2104

Lubricating Oil, Internal Combustion Engine,

Combat/Tactical Service.

MIL-DTL-46162

Fuel, Diesel, Referee Grade.

MIL-PRF-46167

Lubricating Oil, Internal Combustion Engine, Arctic.

MIL-A-53009

Additive, Antifreeze Extender, Liquid Cooling Systems.

MIL-PRF-62048

Air Cleaners, Automotive: Heavy Duty, Dry-Type (For

Internal-Combustion Engines) (Metric).

(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are

available from the Document Automation and Production Service, Building 4/D, 700 Robbins

Avenue, Philadelphia, PA 19111-5094 or https://assist.daps.dla.mil/quicksearch/.)

2.2.2 Other Government documents, drawings, and publications. The following other

Government documents, drawings, and publications form a part of this specification to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract (see 6.2).

DEPARTMENT OF DEFENSE DRAWINGS

11669155

Engine Assembly (TYPE I).

12260210

Engine Assembly (TYPE I).

12268500

Engine Assembly, Low Heat Rejection (TYPE II).

(Copies of these documents are available from DAMI_STANDARDIZATION@conus.army.mil

or U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,

ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000.)

2.3 Non-Government publications. The following document(s) form a part of this

document to the extent specified herein. Unless otherwise specified, the issues of these

documents are those cited in the solicitation or contract (see 6.2).

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

ANSI/ASQC Z1.4 -

Sampling Procedures and Tables for Inspections by

Attributes (DoD Adopted).

(Applications for copies should be addressed to The American National Standards Institute, 11 w

42nd Street, 13th Floor, New York, NY 10036. (or https://www.ansi.org) or American Society for

Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203 (or https://www.asq.org/).)